AVD4.6

The AVD4.6 audio distribution system consists of one audio module (AM4.6), four keypads (KP4.6), one remote control (RC4.6), one power supply (PS 4.6) and two infrared emitters (IF5). A video module (VM4.6), a learning remote control (LCR4.6), as well as equipment to extend the number of zones can be added to the AVD4.6 solution, depending on your needs.

Gain access to all your centrally-located audio and video (optional) equipment via stylish wall-mounted control panels, and remote controls throughout your home. Sound is delivered to in-wall, in-ceiling, or cabinet speakers, while video is delivered to televisions or other display devices.

AM4.6

As the main module, the audio master hub is capable of controlling up to six audio sources, as well as a CCTV input: it can distribute their signals to four main and four sub-zones around the home via Cat5e network cabling.

KP4.6

Each zone is controlled by a KP4.6 wall control panel, a combination amplifier/keypad with volume, bass, treble, balance and fader control. It also supports infrared control and pass-through to source equipment. In addition, the KP4.6 allows local source selection. A 3-color LED indicates operational status and control functionality.

Storage temperature range: -4F to 140F, -20C to 60C
Operating temperature range: 32F to 122F, 0C to 50C

LKP4.6

Shows all source equipment and status. Connects directly to KP4.6 with a ribbon cable (included with LKP4.6) and can only be used in conjunction with KP4.6.
Codes are uploaded from LRC4.6 with cloning cable (included with LKP4.6 and LRC4.6).

RC4.6

The system remote control replicates all the functionality of the wall keypad (KP4.6), including direct source selection, mute and all-off switching. The source equipment can also be remote-controlled from all main and sub-zones with the remote control supplied with the source equipment.

LRC4.6

The Learning Remote Control can operate both the KP4.6 keypad as well as the source equipment connected to the system. The control codes for the KP4.6 are already pre-programmed into the LRC4.6, while new control codes for the source components can be learned from their dedicated remote controls.

LM4.6

Input for 1 local source. Cat5e from AM4.6 to LM4.6 and Cat5e from LM4.6 to KP4.6. Add a second LM4.6 for two local sources. Cat5e from AM4.6 to first LM4.6, Cat5e from first LM4.6 to second LM4.6 and Cat5e from second LM4.6 to KP4.6. IR output for local source.

VM4.6

The video switching unit VM4.6 works in conjunction with the audio hub AM4.6 to distribute video signals. Up to six video input sources and an additional CCTV input may be connected and distributed.